MCT 5015 Potable and Process Water Treatment
MCT 5015 potable and process water treatment is a specially engineered phosphate blend used for water system stabilization. This product is composed of a linear chain polyphosphate that minimizes or controls metal corrosion and scale formation in potable water systems. MCT 5015 sequesters soluble iron, manganese, calcium and magnesium and eliminates the red water problems associated with system corrosion and raw water iron. Lead and copper residuals from system leaching is also minimized.
MCT 5015 is composed of ingredients certified by NSF for potable water treatment applications. MCT 5015 is approved to 23 ppm in the system.
Directions for Use:
MCT 5015 should be fed proportional to water flow. An initial starting dosage of approximately 4-6 gallons of MCT 5015 per million gallons of system water is recommended. Typical dosage residuals range from 0.5-2.0 ppm phosphate by the orthophosphate test procedure. Increase or decrease dosage depending on severity of system conditions. Test kit code 3114 for orthophosphate is recommended.
Product Data:
Form
Liquid
Product pH
4.6-5.6
Specific Gravity
1.30-1.40
Weight/Gallon
11.36
Product Type
Ortho/polyphosphate
Freeze Point
20°F
Handling:
Avoid excessive contact with skin or eyes. If eyes are affected, flush with water and get medical attention.
Product Storage:
Do not allow product to freeze.
Available Packaging:
5 gallon pail
57 lbs.
15 gallon drum
170 lbs.
30 gallon drum
341 lbs.
55 gallon drum
625 lbs.
Test kit 3114-01 recommended
If you would like more information about becoming a distributor of Midsouth Chemical's products, Contact Us!
