MCT 506 Iron and Scale Stabilization

MCT 506 is a liquid long chain polyphosphate product that is designed for use in potable water systems to minimize and control both red and black water problems. MCT 506's ability to sequester iron, manganese and the water hardness ions, calcium and magnesium, helps eliminate scale, stabilize dissolved metals and reduce corrosion.

Benefits Of Using MCT 506:

• Eliminates Red and Black Water
• Improves Water Clarity
• Controls Stains Caused by Iron
• Reduces Lead/Copper Leaching and Manganese
• Reduces Chlorine Demand
• Corrosion/Scale Control
• Minimizes Maintenence Cost

MCT 506 is composed of ingredients certified by NSF for potable water treatment application. MCT 506 is approved by NSF to 43 ppm in the system.

Directons for Use:

MCT 506 is a liquid product and should be fed to the system proportional to water flow. An initial starting dosage of approximately 3-6 gallons of MCT 506 per million gallons of system water is recommended. Increase or decrease dosage depending on severity of system conditions.

Product Data:

Limitations and Handling:

Avoid excessive contact with skin or eyes. If eyes are affected, flush with water and get medical attention.

Product Storage:

DO NOT allow product to freeze.

Available Packaging:

Test Procedure:

Normal use dosage of MCT 506 will produce a test range of 0.5 – 3.0 ppm Phosphate by the polyphosphate test procedure.

Polyphosphate, Recommended TEST KIT code L7884 and L3114-01 (require both).