MCT 506A Iron and Scale Stabilization
MCT 506A is a liquid long chain polyphosphate product that is designed for use in potable water systems to minimize and control both red and black water problems. MCT 506A's ability to sequester iron, manganese and the water hardness ions, calcium and magnesium, helps eliminate scale, stabilize dissolved metals and reduce corrosion.
Benefits Of Using MCT 506A:
- Eliminates Red and Black Water
- Improves Water Clarity
- Minimizes Maintenance Cost
- Controls Stains Caused by Iron and Manganese
- Reduces Chlorine Demand
- Corrosion / Scale Control
- Reduces Lead / Copper Leaching
MCT 506A is composed of ingredients certified by NSF for potable water treatment application. MCT 506A is approved by NSF to 34 ppm in the system.
Directons for Use:
MCT 506A is a liquid product and should be fed to the system proportional to water flow. Typical dosages range from 0.5-3.0 ppm phosphate by the polyphosphate test procedure. An initial starting dosage of approximately 4-5 gallons of MCT 506A per million gallons of system water is recommended. Increase or decrease dosage depending on severity of systems conditions.
Product Data:
Form
Liquid
Product pH
11.2
Specific Gravity
1.565
Product Type
Polyphosphate
Solubility
Complete
Freeze Point
22°F
Limitations and Handling:
Avoid excessive contact with skin or eyes. If eyes are affected, flush with water and get medical attention.
Product Storage:
DO NOT allow product to freeze.
Available Packaging:
5 gallon pail
66 lbs.
15 gallon drum
196 lbs.
30 gallon drum
392 lbs.
55 gallon drum
718 lbs.
Test Procedure:
Polyphosphate, Recommended TEST KIT code L7884 and L3114-01 (require both).
If you would like more information about becoming a distributor of Midsouth Chemical's products, Contact Us!
