MCT 5075 Corrosion Inhibitor For Potable Water System

MCT 5075 is a liquid Zinc/Ortho Phosphate product that is designed to provide corrosion protection in potable water systems. The ingredients in MCT 5075 act to inhibit corrosion by forming a protective, microscopic film on metal surfaces. This film acts as a barrier to minimize the release of iron, lead, copper, and other metals that can produces harmful effects in the system. Also, red water problems that result from corrosion is greatly reduced or eliminated.

MCT 5075 is composed of ingredients certified by NSF for potable water treatment application. MCT 5075 is approved to 20.0 ppm in the system.

Directions For Use:

MCT 5075 should be fed proportional to water flow.MCT 5075 per million gallons of system water is recommended. Typical dosage residuals range from 1-4 ppm phosphate by the orthophosphate test procedure. Increase or decrease dosage depending on severity of system conditions. Test kit code 3114 for orthophosphate is recommended.

Product Data:

Handling:

MCT 5075 is an acidic solution. DO NOT GET IN EYES, ON SKIN OR CLOTHING. Use with adequate ventilation. Avoid breathing vapors. In case of contact, immediately flush eyes or skin with large amounts of water for at least 15 minutes. Call a physician.

Product Storage:

DO NOT allow product to freeze.

Available Packaging: