RO Membrane Treatments
RO 1300 Multi-functional R.O. Antifoulant
RO 1300 is an effective multi-purpose antifoulant that functions to maintain reverse osmosis membranes clean and free of deposit materials. RO 1300 works as a dual function additive in that it prevents the formation of inorganic scale by effectively increasing the solubility of inorganic salts. It also prevents iron fouling of the membranes by holding soluble iron in solution and dispersing insoluble iron. RO 1300 greatly improves membrane efficiency and reduces the potential for damage.
- Prevents Membrane Fouling
- Minimizes Need to Clean System
- Effective against silica fouling
- Single Product Application
- Excellent Iron and Scale Dispersant
- Low Dosage
RO 1300 has been designed to meet the needs of the municipal industry. It is compatible with all polyamide RO and NF membrane types. RO 1300 is a very concentrated membrane cleaner product and therefore the recommended dosage is very low at 2-6 ppm product in the feed water. At this dosage range, it is capable of inhibiting scale in high brine LSI conditions up to +2.5 reading while stabilizing other fouling species. RO 1300 is NSF certified to maximum use of 11 mg/L in the system.
|Melting Point||0°C (32°F)|
Feed RO 1300 at a point after sand or other media filters and before the final cartridge filter, at a place where good in-line mixing will occur. Feed directly from the drum or dilute product with permeate water for feed to the system.
Avoid contact with eyes or skin. Use with adequate ventilation and avoid breathing vapors. In case of contact, immediately flush eyes (lifting upper and lower lids) or skin with large amounts of water for at least 15 minutes. Call a physician. Wear gloves and safety glasses when handling.
Do not allow product to freeze.
|5 Gallon Pail||50 lbs.|
|15 Gallon Drum||151 lbs.|
|30 Gallon Drum||303 lbs.|
|55 Gallon Drum||555 lbs.|
Please contact a Mid South Representative for additional product information and pricing.